BioLector XT Microbioreactor

High-Throughput Bioprocess Development

• 48 / 32 PARALLEL MICROBIOREACTORS
  
• ONLINE MONITORING
• CONTINUOUS & FULLY FLEXIBLE FEEDING
• ACTIVE pH CONTROL
• ANAEROBIC FED-BATCH FERMENTATIONS
• SCALABILITY, REPRODUCIBILITY
• AUTOMATION

High-throughput microbioreactor enables real-time evaluation of biomass, fluorescence, pH, dissolved oxygen in the liquid phase (DO), and other key cultivation parameters for aerobes and anaerobes.

BioLector Learning Center

BioLector XT Specifications:

Volume: 800 - 2400 µL

Temperature: 10 – 50 °C (minimum temperature 8 °C below ambient temperature)

pH Range: pH 4 – 7.5 (depending on plate)

DO Range: 0 – 100% oxygen saturation (100% corresponding to the DO level reached while gassing with 100% O2 without O2 consumption)

Scattered Light Measurement: Resolution > 50 NTU, at densities higher than 500 NTU: 10 % of measured value.

Wavelengths: 365 nm–800 nm

Width: 797 mm(31.4 in)

Height: 522 mm(20.6 in)

Depth: 520 mm(20.5 in)

Weight: 61 kg(134.5 lb)

MICROTITER PLATES:

FLOWER PLATE

48 cultivation wells

Filling volume: 800 – 1900 μL (rpm dependent)

High OTR and high kLa

ROUND WELL PLATE

48 cultivation wells

Filling volume: 1000 – 2400 μL (rpm dependent)

Lower OTR and low shear force

MICROFLUIDIC PLATE

Available as both FlowerPlate and Round Well Plate

32 cultivation wells controlled by 16 reservoir wells

Maximum filling volumes in reservoir wells:

1800 μL (FlowerPlate) and 2000 μL (Round Well Plate)

Same filling volumes for cultivation wells as in 48 well plate